Highest radon potential
Zone 1 means predicted average indoor screening levels above 4 pCi/L. It is a planning designation—not a substitute for testing a home.
Wilson County, Tennessee
Wilson County Radon
Wilson County sits in EPA Zone 1, yet only Lebanon’s published code clearly makes radon-resistant construction part of the local rulebook. In the rest of the county, the appendix question is still open.
EPA zone: Zone 1Region: Middle TennesseeState test data: State test figures confirmed on repeat checks
Yes, it can be. Wilson County is in EPA Zone 1, the highest radon-potential category, where the predicted average indoor screening level is above 4 pCi/L. Levels vary from house to house, so a test is the only way to know your home's level.
In Lebanon, yes: its 2018 code keeps the radon appendix (Appendix F). Unincorporated Wilson County and Mt. Juliet haven't published their appendix lists. Local code details
Order a free short-term kit from the Tennessee Radon Program online or by calling 1-800-232-1139. Place it on the lowest lived-in floor, about 3 feet off the floor, for 3 to 5 days, then mail it back right away. How to test your home
EPA recommends fixing your home if radon is 4 pCi/L or higher, and considering a fix between 2 and 4 pCi/L. Confirm a high short-term result with a second test first. What your result means
Tennessee doesn't license radon professionals, so look for NRPP or NRSB certification. Search both national directories by ZIP code; certified professionals often serve Wilson County from nearby cities. How to choose a radon professional
The EPA designation describes countywide potential, not the result in any one house. Tennessee’s test dashboard shows why an address-specific test still matters.
Zone 1 means predicted average indoor screening levels above 4 pCi/L. It is a planning designation—not a substitute for testing a home.
Sources: Tennessee Radon Testing dashboard · EPA Map of Radon Zones
The four local code regimes do not tell the same story. Lebanon’s ordinance adopts the 2018 IRC and its appendices except a short exclusion list; Appendix F, Radon Control Methods, remains in force.
Unincorporated areas · 2021 IRC
The county page says “with adopted appendices” but does not publish the list, adoption resolution, or effective date.
Mandatory vs. optional cannot be determined from the web record.
2018 IRC · Ord. #18-5619
The ordinance adopts the IRC “and its appendices” while excluding R313.2, 1102.4, Table N1102.1.2, and Appendix L. Radon Appendix F is not excluded.
For new one- and two-family construction in this Zone 1 jurisdiction. Ordinance dated May 15, 2018.
2018 IRC · Ord. 2018-33
The city publishes the adopted code edition, but its adoption ordinance is a scanned PDF whose appendix list could not be read.
Ask whether 2018 IRC Appendix F was adopted.
No published city code found
Watertown’s published municipal code reserves Title 12. The county’s 2026 checklist routes building permits through Wilson County Building Codes.
No city adoption or interlocal agreement was found online.
A new home in Lebanon has a published radon-control requirement. A new home elsewhere in Wilson County may or may not—the public record does not yet settle it. Testing remains the direct way to know the home’s level in every jurisdiction.
Sources: Lebanon Municipal Code, Title 12 · Wilson County Building Codes · Mt. Juliet Building & Codes · Watertown Municipal Code
Wilson County’s growth and new-construction volume make one point especially important: a new house is not automatically a tested house.
Zone 1 and the 9.5 pCi/L dashboard maximum establish potential. Only a home test establishes the level in the property you are buying.
For new construction, ask the builder for documentation of the passive radon-control system installed under the adopted 2018 IRC appendix.
Appendix adoption remains unverified in unincorporated Wilson County, Mt. Juliet, and Watertown. Test new homes there too.
Tennessee’s form asks whether the seller knows of radon, but “Unknown” is permitted and sellers are not required to test. A buyer can request testing during the inspection contingency.
Sources: Tennessee REALTORS® RF 201 disclosure form · Tennessee disclosure overview
Start with a home test. These public-health resources can help you get a kit, talk through the result, and find qualified help if the level is high.
Hotline information: U.S. Environmental Protection Agency and Centers for Disease Control and Prevention. Health statistics: EPA, Health Risk of Radon and American Lung Association.
Tennessee doesn't license radon testers or mitigators, so national certification is the best way to check qualifications. The Tennessee Radon Program points residents to two directories: search them by ZIP code and widen the radius if nothing is listed nearby.
We don't recommend or rank companies. Before you hire, check the certification number in the directory yourself and ask for a follow-up test after any system is installed. Questions to ask a radon professional.
Searches found no local rule for public buildings, schools, or real-estate transactions beyond Tennessee’s statewide framework. That is a research finding, not proof that no unpublished policy exists.
T.C.A. § 49-2-121 requires local education agencies to include radon testing in annual indoor-air-quality inspection and evaluation programs conducted between September 1 and December 31.
Read the bill textThe statewide condition-disclosure form asks about known radon among environmental hazards. The response is based on the seller’s knowledge; the seller is not required to test.
View RF 201TDEC’s statewide indoor Radon Program offers free test kits to homeowners and publishes materials for buyers, professionals, contractors, code officials, and inspectors.
Request through TDECSources were reviewed on October 14, 2026. “Unknown” findings remain unknown where the public web record did not support a conclusion.
Method note: this page distinguishes verified findings from unresolved appendix questions. The Tennessee dashboard tooltip values were read for Wilson County; the dashboard’s lower charts were verified as health-region, not county, aggregates. Professional-directory counts are snapshots, not a registry of every active tester.